Windows 64-bit Driver Installation

Installation and Printing Instructions

These instructions will guide you through the installation and use of the MFP printer in the PC Lab.


Step 1 - The Installation File

The drivers and installation file for the MFP printer can be found on Storage01. The path to the file on storage01\public\uniprint\64bit Uniprint drivers. Here, double click on the file ALL_MFP_SQ_for_x64.

Step 2 - Installing

Click Install to begin.

This installation will install both the printer and the drivers for it, so your machine will automatically be able to find it over the network.

Click the finish button once the installation has finished. The MFP printer should now be ready for use.

Step 3 - Printing

To print to the PC Lab, make sure the printer selected is "CC MFP SQ Spool Queue." To print to the Library, make sure the printer selected is "Library Canon Spool Queue." To print to the Howe Center, make sure the printer selected is "Howe Center MFP SQ Spool Queue."

For example, the following picture is shows the printer for the PC Lab as the selected printer.

When you click ok, you will be prompted by a window asking for your Stevens username. Enter your Stevens username and a password for the print job. This does NOT have to be the same as your Stevens password.

Hit print. Your job will then be sent to the MFP printer.


If you encounter problems during installation, try reinstalling the printer. If you have any problems or questions, sent an email to the Helpdesk at or call us at x5500.


Article ID: 1101
Fri 2/21/14 3:16 PM
Thu 4/24/14 4:19 PM