Kidde 228

Kidde 228

Available Technology:

-laser projection 

-projection screen

-multi head adapters for wired laptop connection to projector

-Solstice wireless projection

-presenter auto tracking camera

-video conferencing

-audio conferencing

-built in camera recording system

-ceiling speakers

-wireless microphones *AVAILABLE UPON REQUEST*

-podium microphone

-touch panel for room control

-dual 75" monitors for projector screen mirroring

-streaming whiteboard

Please click the link below for a detailed User Guide for using the technology in the room. A hard copy of this guide is also located in the podium drawer in the the room.

For all technology issues please contact User Support Services at or 201-380-6599 for immediate assistance. 

Please contact to have markers replaced and whiteboards cleaned.

For wired microphones please contact University Events at

Basic Trouble Shooting Tips:

No image displaying from projector:

-Make sure cables are not damaged, if they are please contact User Support Services at or 201-380-6599.

-Please make sure your laptop is set to Duplicate mode (PC setting) or Mirror display (Mac setting).

-Make sure the correct source is selected on the touch panel.

Cannot dial out from Audio Conference:

-Make sure you dial 7 and then 1 before dialing the number 

-Make sure correct camera and/or microphone is selected in your video conferencing settings.

-iPad users will not be able to use room camera as an external camera. 

No Audio from the speakers:  

-For VGA Connection, make sure the audio cable is secure in the connection wall plate and the laptop.

-Check audio settings on laptop to see if Epson PJ is selected when using HDMI, Headphones should be selected for VGA.

Cannot Connect to Camera:

-Please make sure the USB cable is plugged into the correct port directly under the network port.

Wireless Microphones Not Working:

-Check to make sure the microphone is not muted on the Microphone menu page.

-Check on the Microphone to see if the switch is turned to ON position. 

-Check to see if battery is dead. 

Cannot Connect to Solstice Wireless Presentation:

-Please make sure you are on the Stevens network, Solstice is available to Faculty, Staff, and Students. 

-For iPad users, please make sure you have selected Screen Mirroring option.

-Please make sure you are typing in the correct four-digit key code, a new code is created every time you are disconnected. 

For more information on using Solstice Wireless Projection please visit


Zoom Settings

Zoom Camera Settings

Open Zoom settings then select VIDEO tab located on the left hand side of the screen. Select the camera from the drop down menu. ***CAMERA NAME MAY VARY FROM ROOM TO ROOM***

Zoom Audio Settings

Open Zoom settings then select AUDIO tab located on the left hand side of the screen. Select the Microphone and SPEAKER from the drop down menu. ***MICROPHONE AND SPEAKER NAME MAY VARY FROM ROOM TO ROOM*** Testing your selected options is highly recommended. 





Article ID: 80957
Sat 6/15/19 7:11 PM
Tue 10/13/20 12:11 PM